Toyota CH-R Service Manual: Steering Lock System

Installation

INSTALLATION PROCEDURE 1. INSTALL STEERING HEATER SWITCH (a) Engage the 2 claws to install the steering heater switch to the fuse box opening cover. Install in this directi ...

Precaution

PRECAUTION PRECAUTIONS WHEN CHECKING FOR DTCS (a) When the cable is disconnected from the negative (-) battery terminal, the DTCs stored in the steering lock ECU (steering lock actuator or upper b ...

Other materials:

Toyota CH-R Service Manual > Automatic Headlight Beam Level Control System: Initialization
INITIALIZATION NOTICE: The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headlight ECU sub-assembly LH removal/installation are shown below. Per ...

Toyota CH-R Service Manual > Generator: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL GENERATOR DRIVE END FRAME BEARING (a) Using SST and a press, install a new generator drive end frame bearing. SST: 09950-60010 09951-00470 SST: 09950-70010 09951-07100 (b) Fit the ta ...