Toyota CH-R Service Manual: Problem Symptoms Table

HINT:

• Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
• Inspect the fuses and relays related to this system before inspecting the suspected areas below.

How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: Use the following procedures to troubleshoot the steering lock system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT ...

Terminals Of Ecu

TERMINALS OF ECU TERMINAL INSPECTION *a Component without harness connected (Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly)) - ...

Other materials:

Toyota CH-R Service Manual > Continuously Variable Transaxle System: Initialization
INITIALIZATION NOTICE: Performing Reset Memory will clear the learned value of the yaw rate and acceleration sensor (deceleration sensor zero point calibration) and the CVT oil pressure (CVT oil pressure calibration). Make sure to perform Reset Memory, yaw rate and acceleration ...

Toyota CH-R Service Manual > Wheel Opening Moulding(for Rear): Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL NO. 1 BODY OUTSIDE MOULDING PAD HINT: When installing the No. 1 body outside moulding pad, heat the quarter outside ...