Installation
ComponentsToyota CH-R Service Manual > Generator: Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE GENERATOR PULLEY CAP
(a) Using a screwdriver, remove the generator pulley cap from the generator
pulley with clutch.
NOTICE:
Do not reuse the generator pulley cap.
2. REMOVE GENERATOR PULLEY WITH ...
Toyota CH-R Service Manual > Wheel Opening Moulding(for Rear): Disassembly
DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE NO. 1 BODY OUTSIDE MOULDING PAD
(a) Remove the No. 1 body outside moulding pad (double-sided tape).
HINT:
Do not pu ...