Toyota CH-R Service Manual: Washer Motor

Installation

INSTALLATION PROCEDURE 1. INSTALL LEVEL WARNING SWITCH ASSEMBLY (a) Install the level warning switch assembly as shown in the illustration. Install in this Direction ...

Components

COMPONENTS ILLUSTRATION *1 FRONT FENDER LINER RH *2 FRONT WHEEL OPENING EXTENSION PAD RH *3 WINDSHIELD WASHER MOTOR AND PUMP ...

Other materials:

Toyota CH-R Service Manual > Vehicle Stability Control System: Yaw Rate Sensor Malfunction (C1436)
DESCRIPTION This DTC is stored when the skid control ECU (brake actuator assembly) detects improper installation of the yaw rate and acceleration sensor (airbag sensor assembly) or an abnormality in the difference between the yaw rate sensor value and the control value estimated based on the ...

Toyota CH-R Service Manual > Immobiliser System(w/ Smart Key System): Dtc Check / Clear
DTC CHECK / CLEAR NOTICE: When using the Techstream with the engine switch off, connect the Techstream to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle begins. Then select the vehicle type u ...