Toyota CH-R Service Manual: Hood Lock Control Cable Assembly

Reassembly

REASSEMBLY PROCEDURE 1. CONNECT WASHER HOSE ASSEMBLY (a) Install the 7 clamps. (b) Connect the washer hose assembly to the cla ...

Components

COMPONENTS ILLUSTRATION *1 FRONT FENDER LINER LH *2 NO. 1 RADIATOR GRILLE RETAINER *3 NO. 1 RADIATOR TO SUPPORT SEAL ...

Other materials:

Toyota CH-R Service Manual > Automatic Headlight Beam Level Control System: Initialization has not been Performed (B2450)
DESCRIPTION The headlight ECU sub-assembly LH stores this DTC if initialization has not been performed after the ECU was replaced. DTC No. Detection Item DTC Detection Condition Trouble Area Note B2450 Initializat ...

Toyota CH-R Service Manual > Vehicle Stability Control System: Steering Angle Sensor Power Source Voltage Malfunction (C1432)
DESCRIPTION This DTC is stored when the skid control ECU (brake actuator assembly) receives a +B line open signal from the steering angle sensor. DTC No. Detection Item DTC Detection Condition Trouble Area C1432 Steering Ang ...