Toyota CH-R Service Manual: Main Body Ecu

Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 1 INTEGRATION RELAY (a) Connect the 2 connectors. (b) Engage the claws to install the No. 1 integration relay as shown in the illustration. ...

Components
COMPONENTS ILLUSTRATION *A except Cold Area Specification Vehicles *B for Cold Area Specification Vehicles *1 INSTRUMENT PAN ...

Other materials:

Toyota CH-R Service Manual > Brake Actuator: On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT PROCEDURE 1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3 with the ignition switch off. (b) Start the engine and run it at idle. (c) Turn the Techstream on. (d) Enter the following menus: Chassis / ABS/VSC/TRC/EPB / Active Test. HINT ...

Toyota CH-R Service Manual > Rear Bumper: Installation
INSTALLATION PROCEDURE 1. INSTALL REAR BUMPER ASSEMBLY (a) Engage the claws as shown in the illustration. Install in the Direction (b) Engage the claws to install the rear bumper assembly as shown in the illustration. HINT: Use the same procedure for the RH side ...

© 2017-2020 Copyright www.tochr.net
0.0168