Toyota CH-R Service Manual: Diagnostic Trouble Code Chart

Dtc Check / Clear

DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body or S ...

No Response from Steering Lock ECU (B2786)

DESCRIPTION This DTC is stored when LIN communication between the certification ECU (smart key ECU assembly) and steering lock ECU steering lock actuator or upper bracket assembly) stops for 10 s ...

Other materials:

Toyota CH-R Service Manual > Vehicle Stability Control System: Low Power Supply Voltage Malfunction (C1241)
DESCRIPTION If a malfunction is detected in the power supply circuit, the skid control ECU (brake actuator assembly) stores this DTC and the fail-safe function prohibits ABS operation. This DTC is stored when the +BS terminal voltage meets one of the DTC detection conditions due to a malfunct ...

Toyota CH-R Service Manual > Spiral Cable: Installation
INSTALLATION PROCEDURE 1. INSPECT SPIRAL CABLE SUB-ASSEMBLY (w/o Steering Heater) NOTICE: If the steering sensor is installed to a misaligned spiral cable sub-assembly, DTCs for an abnormal steering sensor value such as DTC B1801, C1231 and C1433 will be stored and it will be impossible to c ...