DTC CHECK / CLEAR
CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body or Smart Key (w/ Smart Key System) / Trouble Codes.
Body Electrical > Main Body > Trouble Codes Body Electrical > Smart Key > Trouble Codes(e) Check the details of the DTCs.
Click here
CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body or Smart Key (w/ Smart Key System) / Trouble Codes.
Body Electrical > Main Body > Clear DTCs Body Electrical > Smart Key > Clear DTCs(e) Clear the DTCs.
Data List / Active Test
Diagnostic Trouble Code ChartToyota CH-R Service Manual > Height Control Sensor: Inspection
INSPECTION
PROCEDURE
1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a) Preparation for check
(1) Confirm the standard, high and low positions of the link that will be used
in the following inspection.
The standard position is 58° from the maximum link angle (high) and
51° ...
Toyota CH-R Service Manual > Can Communication System: Check Bus 2 Lines for Short Circuit
DESCRIPTION
There may be a short circuit between the CAN main bus lines and/or CAN branch
lines when the resistance between terminals 18 (CA4H) and 17 (CA4L) of the central
gateway ECU (network gateway ECU) is below 54 Ω.
Symptom
Trouble Area
Resistance ...