Toyota CH-R Service Manual: Transmission Control Cable

Torque Converter And Drive Plate

Inspection INSPECTION PROCEDURE 1. INSPECT TORQUE CONVERTER ASSEMBLY (a) Inspect the one-way clutch. (1) Press on the spline of the stator with a finger and rotate the spline. ...

Precaution

PRECAUTION IGNITION SWITCH EXPRESSIONS (a) The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used ...

Other materials:

Toyota CH-R Service Manual > Pre-collision System: Lost Communication with Cruise Control Front Distance Range Sensor (U0235)
DESCRIPTION The millimeter wave radar sensor assembly is connected to the skid control ECU (brake actuator assembly) by a CAN communication line. When entering test mode, the skid control ECU (brake actuator assembly) communicates with the millimeter wave radar sensor assembly and determines w ...

Toyota CH-R Service Manual > Immobiliser System(w/o Smart Key System): Engine does not Start but Initial Combustion Occurs
DESCRIPTION If the key ID codes of the key and transponder key ECU assembly match, the immobiliser system is unset and the engine start permission signal is sent to the ECM. When the ID codes of the transponder key ECU assembly and ECM match, the engine starts. WIRING DIAGRAM CAUTION / NOTI ...