Toyota CH-R Service Manual: Adjustment

ADJUSTMENT

PROCEDURE

1. ADJUST PARK/NEUTRAL POSITION SWITCH

(a) Apply the parking brake and move the shift lever to N.

(b) Loosen the 2 bolts of the park/neutral position switch.

*a

Neutral Basic Line

*b

Protrusion

(c) Align the protrusion with the neutral basic line.

(d) Hold the park/neutral position switch in that position and tighten the 2 bolts.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

(e) After the adjustment, check the operation of the park/neutral position switch.

Click here

    Inspection
    INSPECTION PROCEDURE 1. INSPECT PARK/NEUTRAL POSITION SWITCH *a Component without harness connected (Park/Neutral Position Switch) (a) Measure the resistance ac ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL PARK/NEUTRAL POSITION SWITCH (a) Temporarily install the park/neutral position switch to the continuously variable transaxle assembly with the 2 bolts. ...

    Other materials:

    Toyota CH-R Service Manual > Power Window Control System: Rear Power Window LH does not Operate with Rear Power Window Switch LH
    DESCRIPTION When the ignition switch is ON, the power window regulator motor assembly (for rear LH door) is operated by the rear power window regulator switch assembly (for LH door). The power window regulator motor assembly (for rear LH door) has motor, regulator, and ECU functions. WIRING ...

    Toyota CH-R Owners Manual > Steps to take in an emergency: If the engine will not start
    If the engine will not start even though correct starting procedures are being followed, consider each of the following points: The engine will not start even though the starter motor operates normally. One of the following may be the cause of the problem: There may not be sufficient fuel in ...

    Toyota C-HR (AX20) 2023-2025 Owner's Manual

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2025 Copyright www.tochr.net
    0.0074