Toyota CH-R Service Manual: Diagnostic Trouble Code Chart

Dtc Check / Clear

DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Navigation Sys ...

Back Camera Disconnected (C1622)

DESCRIPTION This DTC is stored if the radio and display receiver assembly judges that the signals or signal lines between the radio and display receiver assembly and the rear television camera as ...

Other materials:

Toyota CH-R Service Manual > Power Window Regulator Motor(for Front Door): Components
COMPONENTS ILLUSTRATION *A for Driver Side *B for Front Passenger Side *1 FRONT DOOR BELT SEAL *2 FRONT DOOR GLASS INNER WEATHERSTRIP *3 FRONT DOOR INSIDE HANDLE BEZEL PLUG ...

Toyota CH-R Service Manual > Blind Spot Monitor System: Slave Module Horizontal Axis Misalignment (C1AC2)
DESCRIPTION This DTC is stored when the angle of the blind spot monitor sensor RH (Slave) deviates more than the allowable range from the horizontal axis. HINT: If a drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with th ...