Unlocking and locking the doors from the outsideToyota CH-R Service Manual > Vacuum Pump: Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE END COVER
(a) Using a T25 "TORX" socket wrench, remove the 5 screws and end cover.
NOTICE:
Hold the vacuum pump assembly so that its installation surface,
fitting parts and oil pipe will not be damaged.
As the vac ...
Toyota CH-R Service Manual > Rear Seat Inner Belt Assembly(for Lh Side): Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
(a) w/o Seat Belt Warning System:
(1) Tighten the bolt and install the rear seat inner with center belt
assembly LH.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
NOTICE:
Do not allow the ancho ...