Toyota CH-R Service Manual: Problem Symptoms Table

HINT:

• Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
• Inspect the fuses and relays related to this system before inspecting the suspected areas below.

System Description

SYSTEM DESCRIPTION IMMOBILISER SYSTEM DESCRIPTION The immobiliser system is designed to prevent the vehicle from being stolen. This system uses the transponder key ECU assembly that stores the key ...

Registration

REGISTRATION PROCEDURE 1. DESCRIPTION OF CODE REGISTRATION (a) The door control transmitter assembly has 2 codes: the key code (immobiliser code) and the wireless code. Both of these codes need t ...

Other materials:

Toyota CH-R Service Manual > Lin Communication System: How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the LIN communication system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...

Toyota CH-R Service Manual > Continuously Variable Transaxle System: Output Speed Sensor Circuit No Signal (P0722,P077C,P077D)
DESCRIPTION The ECM receives a signal from the transmission revolution sensor (NOUT) installed in the continuously variable transaxle and determines the output shaft (secondary pulley) speed in order to control the gear ratio. The transmission revolution sensor (NOUT) detects the continuously ...