Toyota CH-R Service Manual: System Description

SYSTEM DESCRIPTION

FRONT SEAT HEATER

(a) By operating the seat heater switch, the temperature can be controlled within a range of 35 to 42°C (95 to 108°F).

(b) The seat heater switch indicator lights indicate the seat heater operating status.

(c) The seat heaters of both seats are controlled by the seat heater control sub-assemblies.

    How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the seat heater system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO ...

    Operation Check
    OPERATION CHECK CHECK FRONT SEAT HEATER (a) Turn the ignition switch to ON. (b) Turn the seat heater switch on and check that the indicator illuminates and the surface of the front seat warms up. ...

    Other materials:

    Toyota CH-R Service Manual > Front Evaporator Temperature Sensor(for Denso Made): Inspection
    INSPECTION PROCEDURE 1. INSPECT NO. 1 COOLER THERMISTOR (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. *a Component without harness connected (No. 1 Cooler Thermistor) *b Sensing Portion ...

    Toyota CH-R Service Manual > Vehicle Stability Control System: Acceleration Sensor Malfunction (C1420)
    DESCRIPTION This DTC is stored when the skid control ECU (brake actuator assembly) detects an abnormality in the difference between the acceleration sensor value and the control value estimated based on the yaw rate sensor, steering angle sensor and speed sensor signals. DTC No. ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2022 Copyright www.tochr.net
    0.0104