Toyota CH-R Service Manual: Refrigerant Line

Installation

INSTALLATION PROCEDURE 1. INSTALL QUICK HEATER ASSEMBLY (for VALEO Made) (a) Install the quick heater assembly with the 2 screws as shown in the illustration. Install in this ...

Components

COMPONENTS ILLUSTRATION *A for VALEO Made - - *1 SUCTION PIPE SUB-ASSEMBLY *2 COOLER REFRIGERANT LIQUI ...

Other materials:

Toyota CH-R Service Manual > Steering Gear: Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE STEERING RACK BOOT CLIP (for LH Side) (a) Using pliers, remove the steering rack boot clip. 2. REMOVE STEERING RACK BOOT CLIP (for RH Side) HINT: Perform the same procedure as for the LH side. 3. REMOVE STEERING RACK BOOT CLAMP (for LH Side) (a) Usi ...

Toyota CH-R Service Manual > Occupant Classification System: Dtc Check / Clear
DTC CHECK / CLEAR DTC CHECK (a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON, and wait for at least 10 seconds. (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes. Body E ...