CUSTOMIZE PARAMETERS
CUSTOMIZE AIR CONDITIONING SYSTEM
(a) Customizing with the Techstream.
NOTICE:
HINT:
The following items can be customized.
(1) Connect the Techstream.
(2) Turn the ignition switch ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Air Conditioner.
(5) Select the setting by referring to the table below.
Air Conditioner
Tester Display |
Description |
Default |
Setting |
ECU |
---|---|---|---|---|
Set Temperature Shift |
Function to perform control with the shifted temperature versus the displayed temperature |
Normal |
00001:-2C,00010:-1C,00100:Normal,01000:+1C,10000:+2C |
Air conditioning amplifier assembly |
Evaporator Control |
Function to set the evaporator control to the Automatic position (AUTO) to save power or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows fogging up. |
Automatic |
0:Automatic,1:Manual |
Air conditioning amplifier assembly |
Air Inlet Mode |
Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly |
Automatic |
0:Automatic,1:Manual |
Air conditioning amplifier assembly |
Foot/DEF Auto Mode |
Function to turn the airflow to foot/defroster automatically when AUTO mode is on |
ON |
0:ON,1:OFF |
Air conditioning amplifier assembly |
Foot/DEF Automatic Blow Up Function |
Function to increase the blower level automatically when the defroster is on |
ON |
0:ON,1:OFF |
Air conditioning amplifier assembly |
Fan speed increment control |
Function to set the speed to reach the target blower fan speed when AUTO mode is on |
Normal |
001:Slow,010:Normal,100:Fast |
Air conditioning amplifier assembly |
Ion Generate Control |
Function to generate the ion is stopped when item is OFF*1 |
ON |
0:ON,1:OFF |
Air conditioning amplifier assembly |
Outside Air Mode Auto Switch Function |
Function to automatically change the air inlet to FRESH mode when the ignition switch is off for 60 seconds |
ON |
0:ON,1:OFF |
Air conditioning amplifier assembly |
(b) Customizing with the multi-display (w/ Toyota Safety Sense P).
(1) Turn the ignition switch ON.
(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Climate Settings.
(3) Select the setting by referring to the table below.
Climate Setting
Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
Auto A/C Mode |
On |
Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. |
On or Off |
Air Conditioning Amplifier |
Toyota CH-R Service Manual > Rear Seat Side Airbag Assembly: Disposal
DISPOSAL
CAUTION / NOTICE / HINT
CAUTION:
Before performing pre-disposal deployment of any SRS part, review and closely
follow all applicable environmental and hazardous material regulations. Pre-disposal
deployment may be considered hazardous material treatment.
HINT:
Use the same ...
Toyota CH-R Service Manual > Vehicle Stability Control System: Test Mode Procedure
TEST MODE PROCEDURE
WARNING LIGHT AND INDICATOR LIGHT INITIAL CHECK
(a) When the ignition switch is turned to ON, check that the ABS warning light,
brake system warning light (red indicator), VSC OFF indicator light, multi-information
display (TRAC OFF message) (for Color TFT Type), TRAC OFF i ...