Toyota CH-R Service Manual: Diagnosis System

DIAGNOSIS SYSTEM

CHECK DLC3

(a) Check the DLC3.

Click here

INSPECT BATTERY VOLTAGE

(a) Measure the vehicle battery voltage.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery.

    Problem Symptoms Table
    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are lis ...

    Terminals Of Ecu
    TERMINALS OF ECU CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY *A Main Body ECU (Multiplex Network Body ECU) with 2 Connecto ...

    Other materials:

    Toyota CH-R Service Manual > Brake Actuator: On-vehicle Inspection
    ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT PROCEDURE 1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3 with the ignition switch off. (b) Start the engine and run it at idle. (c) Turn the Techstream on. (d) Enter the following menus: Chassis / ABS/VSC/TRC/EPB / Active Test. HINT ...

    Toyota CH-R Service Manual > Clock System: Parts Location
    PARTS LOCATION ILLUSTRATION *1 CLOCK ASSEMBLY *2 MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) *3 INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY - ECU-DCC NO. 2 FUSE - ECU-ACC FUSE - PANEL FUSE - ECU-IG1 NO. 4 FUSE - A ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.0102