Toyota CH-R Service Manual: Problem Symptoms Table

HINT:

• Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
• Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Operation Check

OPERATION CHECK CHECK FUNCTION (a) Check that the key reminder warning buzzer sounds. (1) With the driver door closed, insert the key into the ignition key cylinder and then make sure that the ig ...

Diagnosis System

DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here INSPECT BATTERY VOLTAGE (a) Measure the vehicle battery voltage. Standard Voltage: 11 to 14 V If the voltage is below 11 V, rech ...

Other materials:

Toyota CH-R Service Manual > Smart Key System(for Entry Function): Driver Side Door Entry Unlock Function does not Operate
DESCRIPTION If the entry unlock function does not operate for the driver door only, but the entry lock function operates, the request code is being transmitted properly from the driver door. In this case, there may be a problem related to the unlock sensor (connection between the certificatio ...

Toyota CH-R Service Manual > Blind Spot Monitor System: Power Source Circuit
DESCRIPTION This circuit provides power to operate the blind spot monitor sensor. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure. PROCEDURE 1. CHECK HARNESS AND CONNECTOR ...