REMOVAL
PROCEDURE
1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL
Click here
2. REMOVE OUTER MIRROR SWITCH ASSEMBLY
|
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the outer mirror switch assembly. |
|
Components
InspectionToyota CH-R Service Manual > Tire Pressure Warning System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptoms
are listed in order of probability in the "Suspected Area" column of the
table. Check each sy ...
Toyota CH-R Service Manual > Vacuum Warning Switch: Installation
INSTALLATION
PROCEDURE
1. INSTALL VACUUM WARNING SWITCH ASSEMBLY
(a) Install a new check valve grommet to the brake booster assembly.
(b) Install the vacuum warning switch assembly to the brake booster assembly
as shown in the illustration.
...