Toyota CH-R Service Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE ROCKER PANEL MOULDING PAD

HINT:

Using the same procedure, remove every rocker panel moulding pad.

(a) Remove the rocker panel moulding pad.

    Removal
    REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. REMOVE REAR WHEEL HOUSE FRONT ...

    Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL ROCKER PANEL MOULDING PAD HINT: Using the same procedure, remove every rocker panel moulding pad. When installing the rocker panel moulding pad, heat ...

    Other materials:

    Toyota CH-R Service Manual > Vacuum Pump: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during vacuum pump assembly removal/installation are shown below. Necessary Procedure After Parts Removed/ ...

    Toyota CH-R Service Manual > Tire Pressure Warning System: Initialization Switch (for Test Mode DTC) (C2198/98)
    DESCRIPTION The switch circuit inside the combination meter assembly turns on and off according to the steering pad switch assembly operation. During test mode, when the steering pad switch assembly is operated, "TPMS" is selected on the multi-information display and the "ENTER& ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.0267