Toyota CH-R Owners Manual: When using a child restraint system

■ When installing a child restraint system to a front passenger seat For the safety of a child, install a child restraint system to a rear seat. When installing child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.

  • Raise the seatback as much as possible
  • Move the seat to the rearmost position
  • If the head restraint interferes with the child restraint system installation and the head restraint can be removed, remove the head restraint

Toyota CH-R. Child safety

WARNING

■When using a child restraint system Observe the following precautions.

Failure to do so may result in death or serious injury.

  • Never install a rear-facing child restraint system on the front passenger seat even if the "AIR BAG OFF" indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.
  • A forward-facing child restraint system may be installed on the front passenger seat only when it is unavoidable. A child restraint system that requires a top tether strap should not be used in the front passenger seat since there is no top tether strap anchor for the front passenger seat.
  • A forward-facing child restraint system may be installed on the front passenger seat only when it is unavoidable. When installing a forward-facing child restraint system on the front passenger seat, move the seat as far back as possible, even if the "AIR BAG OFF" indicator light is illuminated.Toyota CH-R. Child safety If the head restraint interferes with the child restraint system installation and the head restraint can be removed, remove the head restraint.
  • Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front or rear pillars, or roof side rails from which the SRS side airbags or SRS curtain shield airbags deploy even if the child is seated in the child restraint system. It is dangerous if the SRS side airbags and curtain shield airbags inflate, and the impact could cause death or serious injury to the child.Toyota CH-R. Child safety

 

WARNING

■When using a child restraint system Observe the following precautions.

Failure to do so may result in death or serious injury.

  • When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child's shoulder. The belt should be kept away from the child's neck, but not so that it could fall off the child's shoulder.
  • Use child restraint system suitable to the age and size of the child and install it to the rear seat.
  • If the driver's seat interferes with the child restraint system and prevents it from being attached correctly, attach the child restraint system to the right-hand rear seat.
  • Adjust the front passenger seat so that it does not interfere with the child restraint system.

Toyota CH-R. Child safety

    Child restraint systems
    Before installing a child restraint system in the vehicle, there are precautions that need to be observed, different types of child restraint systems, as well as installation methods, etc., writte ...

    Child restraint system fixed with a seat belt
    A child restraint system for a small child or baby must itself be properly restrained on the seat with the lap portion of the lap/shoulder belt. Installing child restraint system using a seat belt ...

    Other materials:

    Toyota CH-R Service Manual > Front Evaporator Temperature Sensor(for Valeo Made): Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during the No. 1 cooler thermistor removal/installation are shown below. Necessary Procedure After Parts ...

    Toyota CH-R Service Manual > Steering Column Assembly: Installation
    INSTALLATION PROCEDURE 1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD 2. INSTALL STEERING COLUMN ASSEMBLY NOTICE: Make sure that the wire harness is not interfering with the steering column assembly. (a) Install the steering column assembly with the bolt and 2 nuts. Torque: 36 N·m {367 kgf·c ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.0117