Toyota CH-R Service Manual: Disposal

DISPOSAL

CAUTION / NOTICE / HINT

HINT:

The tire pressure warning valve and transmitter is powered by a lithium battery. When disposing of the tire pressure warning valve and transmitter, remove the battery and dispose of it properly.

PROCEDURE

1. DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER

Urethane

(a) Remove the urethane that protects the lithium battery and the circuit board.

(b) Cut the 2 terminals to remove the lithium battery from the tire pressure warning valve and transmitter.

*1

Terminal

*2

Lithium Battery

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during ...

    Installation
    INSTALLATION CAUTION / NOTICE / HINT NOTICE: Always use a new grommet and valve core when installing the tire pressure warning valve and transmitter. Check that the washer and nut a ...

    Other materials:

    Toyota CH-R Service Manual > Automatic Headlight Beam Level Control System: Left Headlight ECU Variation Error (B2456)
    DESCRIPTION This DTC is stored when a headlight ECU sub-assembly LH which is not compatible with the vehicle has been installed. DTC No. Detection Item DTC Detection Condition Trouble Area Note B2456 Left Headligh ...

    Toyota CH-R Service Manual > Airbag System: Side Airbag Sensor Assembly No.2 Lost Communication (LH) (B163B/86,B163C/86)
    DESCRIPTION The side collision sensor LH circuit (bus 2) consists of the airbag sensor assembly and floor side airbag sensor LH. The floor side airbag sensor LH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the airbags and pretensioners should ...

    © 2017-2020 Copyright www.tochr.net
    0.025