Toyota CH-R Service Manual: Steering System

Installation

INSTALLATION PROCEDURE 1. INSTALL STEERING PAD SWITCH ASSEMBLY (a) Engage the 4 claws and 4 pins to install the steering pad switch assembly. (b) Install the 2 screws. (c) Connect connector to th ...

Precaution

PRECAUTION IGNITION SWITCH EXPRESSIONS (a) The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used ...

Other materials:

Toyota CH-R Service Manual > Tire Pressure Warning System: No Signal from Transmitter ID1 (C2121/21-C2125/25,C2181/81-C2185/85)
DESCRIPTION The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. The measured values are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves. The ECU compares the measured tire pres ...

Toyota CH-R Service Manual > Occupant Classification System: Initialization
INITIALIZATION DESCRIPTION (a) Zero point of the occupant classification sensors may deviate in the following situations. To ensure sensor accuracy, be sure to perform Zero Point Calibration. The occupant detection ECU is replaced. HINT: As the zero point is not automatically store ...