Toyota CH-R Service Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT STEERING WHEEL FREE PLAY

(a) Turn the Engine Start so that the power steering is ready to operate.

(b) Stop the vehicle and align the front wheels facing straight ahead.

(c) Gently turn the steering wheel right and left, and check for steering wheel free play.

Maximum Free Play:

30 mm (1.18 in.)

  • If the free play exceeds the maximum, check the steering system.

    Click here

    Precaution
    PRECAUTION IGNITION SWITCH EXPRESSIONS (a) The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used ...

    Problem Symptoms Table
    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are lis ...

    Other materials:

    Toyota CH-R Service Manual > Pre-collision System: Dtc Check / Clear
    DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes. (e) Check for DTCs. Click here Body Electrical > Pre-Collision 2 > Tro ...

    Toyota CH-R Service Manual > Airbag System: Occupant Classification System Malfunction (B1650/32,B165A/32)
    DESCRIPTION The airbag sensor assembly and occupant detection ECU communicate via CAN communication. When the occupant detection ECU stores DTC B1771, B1780, B1782, B1795, B1798, B1799, U0125 or U0129, the airbag sensor assembly receives this information and stores DTC B1650/32. When the occu ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2022 Copyright www.tochr.net
    0.0109