Toyota CH-R Service Manual: Diagnosis System

DIAGNOSIS SYSTEM

CHECK DLC3

(a) Check the DLC3.

Click here

CHECK WARNING LIGHT

(a) When a problem occurs in the power steering system, the EPS warning light in the combination meter assembly comes on to inform the driver of the problem.

*a

EPS Warning Light

    Problem Symptoms Table
    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are lis ...

    Terminals Of Ecu
    TERMINALS OF ECU CHECK POWER STEERING ECU ASSEMBLY *a Component without harness connected (Power Steering ECU Assembly) - - (a) Measure the ...

    Other materials:

    Toyota CH-R Service Manual > Vacuum Pump: Disassembly
    DISASSEMBLY PROCEDURE 1. REMOVE END COVER (a) Using a T25 "TORX" socket wrench, remove the 5 screws and end cover. NOTICE: Hold the vacuum pump assembly so that its installation surface, fitting parts and oil pipe will not be damaged. As the vac ...

    Toyota CH-R Service Manual > Air Conditioning System(for Automatic Air Conditioning System With Top-mounted Air Conditioner Pressure Sensor): Evaporator Temperature Sensor Circuit (B1413)
    DESCRIPTION The No. 1 cooler thermistor (evaporator temperature sensor) is installed to the evaporator in the air conditioner unit to detect the temperature of the cooled air that has passed through the evaporator, which is used to control the air conditioning system. It sends signals to the ...

    © 2017-2021 Copyright www.tochr.net
    0.0152