Toyota CH-R Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the ID code box (immobiliser code ECU), refer to Registration.

Click here

PROCEDURE

1. INSTALL ID CODE BOX (IMMOBILISER CODE ECU)

(a) Engage the guides to install the ID code box (immobiliser code ECU) as shown in the illustration.

Install in this Direction (1)

Install in this Direction (2)

2. INSTALL AIR CONDITIONER UNIT ASSEMBLY (for Cold Area Specification Vehicles)

Click here

3. INSTALL AIR CONDITIONER UNIT ASSEMBLY (except Cold Area Specification Vehicles)

Click here

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during th ...

    Immobiliser System(w/ Smart Key System)
    ...

    Other materials:

    Toyota CH-R Service Manual > Pre-collision: Pre-collision System Warning Buzzer
    Components COMPONENTS ILLUSTRATION *1 PRE-COLLISION CITY BUZZER - - Removal REMOVAL PROCEDURE 1. REMOVE FUSE BOX OPENING COVER Click here 2. REMOVE PRE-COLLISION CITY BUZZER (a) Disengage the clamp. ...

    Toyota CH-R Service Manual > Rear Combination Light Assembly(for Bulb Type): Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY (a) Connect the connector. (b) Engage the guide, pin and clip to temporarily instal ...

    © 2017-2019 Copyright www.tochr.net
    0.0185