Toyota CH-R Service Manual: Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

Toyota CH-R Service Manual / Navigation / Multi Info Display / Navigation System / Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

CAUTION / NOTICE / HINT

NOTICE:

Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possible to listen to the broadcast.

PROCEDURE

1.

CHECK SATELLITE RADIO

(a) Check radio condition.

Result

Proceed to

Broadcast cannot be selected.

A

Broadcast can be selected, but selection cannot be memorized.

B

A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

B

2.

CHECK SATELLITE RADIO

(a) Check the number of preset channels.

OK:

36 channels have already been preset.

OK

END (ONLY 36 CHANNELS CAN BE PRESET)

NG

3.

CHECK BATTERY

(a) Check if the battery was replaced.

OK:

Battery was not replaced.

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

4.

ADD PRESET CHANNEL INTO MEMORY AGAIN

(a) Check if the preset channels that have been cleared can be added into memory again.

OK:

Preset channels can be added into memory.

OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Satellite Radio Broadcast cannot be Received
    CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be p ...

    Weather and traffic information cannot be obtained
    CAUTION / NOTICE / HINT NOTICE: When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another ...

    Other materials:

    Toyota CH-R Service Manual > Vehicle Stability Control System: Stop Light Control Relay Malfunction (C1380)
    DESCRIPTION When the dynamic radar cruise control system*1, pre-collision system*1 or brake hold control system operates, the skid control ECU outputs a stop light drive output (STPO) signal to illuminate the stop lights. *1: w/ Pre-collision System DTC No. Detection Ite ...

    Toyota CH-R Service Manual > Charging System: Freeze Frame Data
    FREEZE FRAME DATA DESCRIPTION The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not ...

    © 2017-2020 Copyright www.tochr.net
    0.0202