Toyota CH-R Owners Manual: Rear seats

WARNING Observe the following precautions. Failure to do so may result in death or serious injury.

■When folding the rear seatbacks down

• Do not fold the seatbacks down while driving.
• Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
• Do not allow anyone to sit on a folded seatback or in the luggage compartment while driving.
• Do not allow children to enter the luggage compartment.
• Do not allow anyone to sit on the rear center seat if the rear right seat is folded down, as the seat belt buckle for the rear center seat belt is then concealed under the folded seat and cannot be used.
• Be careful not to get your hand caught when folding the rear seatbacks.
• Adjust the position of the front seats before folding down the rear seatbacks so that the front seats do not interfere with the rear seatbacks when folding down the rear seatbacks.

■After returning the rear seatback to the upright position

• Make sure that the seatback is securely locked in position by lightly rocking it back and forth.

  If the seatback is not securely locked, the red marking will be visible on the seatback lock release knob. Make sure that the red marking is not visible.

• Check that the seat belts are not twisted or caught in the seatback.

  If the seat belt gets caught between the seatback's securing hook and latch, it may damage the seat belt.

Front seats

Adjustment procedure Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever Lumbar support adjustment switch (if equipped) WARNING■When a ...

Head restraints

Head restraints are provided for all seats. Head restraints are provided for all seats. Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release but ...

Other materials:

Toyota CH-R Service Manual > Back Door Courtesy Switch: Installation
INSTALLATION PROCEDURE 1. INSTALL BACK DOOR LOCK ASSEMBLY HINT: Make sure to remove the string before installing a new back door lock assembly. (a) Apply MP grease to the sliding parts of the back door lock assembly. (b) Install the back door lock assembly with the 3 bolts. Torque: 7.5 N·m ...

Toyota CH-R Service Manual > Lumbar Support Adjuster Assembly: Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Be sure to read Precaution thoroughly before servicing. Click here Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: Lumbar support adjuster assembly is available only on the driver si ...