CAUTION / NOTICE / HINT
HINT:
Some versions of "Bluetooth" compatible audio players may not function, or the functions may be limited using the radio and display receiver assembly, even if the portable audio player itself can play files.
Click here
PROCEDURE
1. |
CHECK THAT PORTABLE PLAYER IS "Bluetooth" AUDIO COMPATIBLE |
(a) Check if the portable player is "Bluetooth" audio compatible.
Result |
Proceed to |
---|---|
The portable player is "Bluetooth" audio compatible. |
A |
The portable player is not "Bluetooth" audio compatible. |
B |
B | ![]() |
USE A "Bluetooth" AUDIO COMPATIBLE PORTABLE PLAYER |
|
2. |
CHECK CONNECTION PROCEDURE OF CONNECTED DEVICE |
(a) Referring to the owner's manual, correctly register the portable player.
(b) Check that the portable player has been registered as a connected device.
HINT:
The portable player cannot be registered under any of the following conditions:
OK:
The portable player has been registered as a connected device.
OK | ![]() |
END (CHECK CONNECTION PROCEDURE OF CONNECTED DEVICE) |
|
3. |
CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the portable player can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
OK:
The portable player can be registered.
NG | ![]() |
MALFUNCTION IN PORTABLE PLAYER |
|
4. |
REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
(a) Remove additional devices which use radio waves.
(b) Place the portable player close to the radio and display receiver assembly.
(c) Check that the portable player can be registered as a connected device.
OK:
The portable player can be registered.
OK | ![]() |
END (ADDITIONAL DEVICES WAS DEFECTIVE) |
NG | ![]() |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Toyota CH-R Service Manual > Transponder Key Ecu: Installation
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
Before replacing the transponder key ECU assembly, refer to Registration.
Click here
PROCEDURE
1. INSTALL TRANSPONDER KEY ECU ASSEMBLY
(a) Engage the guides to install the transponder key ECU assembly as shown in
the illustration.
...
Toyota CH-R Service Manual > Vehicle Stability Control System: Yaw Rate Sensor (C1234,C1472,C1474)
DESCRIPTION
The skid control ECU (brake actuator assembly) receives signals from the yaw
rate and acceleration sensor (airbag sensor assembly) via CAN communication.
HINT:
If there is a malfunction in the bus lines between the yaw rate and acceleration
sensor (airbag sensor assembly) and the ...