Toyota CH-R Service Manual: Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

Toyota CH-R Service Manual / Audio / Video / Audio And Visual System(for Radio And Display Type) / Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

CAUTION / NOTICE / HINT

NOTICE:

Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possible to listen to the broadcast.

PROCEDURE

1.

CHECK SATELLITE RADIO

(a) Check radio condition.

Result

Proceed to

Broadcast cannot be selected.

A

Broadcast can be selected, but selection cannot be memorized.

B

A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

B

2.

CHECK SATELLITE RADIO

(a) Check the number of preset channels.

OK:

36 channels have already been preset.

OK

END (ONLY 36 CHANNELS CAN BE PRESET)

NG

3.

CHECK BATTERY

(a) Check if the battery was replaced.

OK:

Battery was not replaced.

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

4.

ADD PRESET CHANNEL INTO MEMORY AGAIN

(a) Check if the preset channels that have been cleared can be added into memory again.

OK:

Preset channels can be added into memory.

OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Satellite Radio Broadcast cannot be Received
    CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be p ...

    No Sound can be Heard from Speakers
    PROCEDURE 1. CHECK AUDIO SETTINGS (a) In sound output setting mode, set volume, fader and balance to the initial values and check that the sound is normal. OK: A ...

    Other materials:

    Toyota CH-R Service Manual > Seat Heater System: Parts Location
    PARTS LOCATION ILLUSTRATION *1 NO. 2 ENGINE ROOM RELAY BLOCK - S/HTR F/R FUSE - S/HTR F/L FUSE - - ILLUSTRATION *A for TMMT Made *B for TMC Made *1 SEAT HEATER S ...

    Toyota CH-R Service Manual > Blind Spot Monitor System: Master Module Horizontal Axis Misalignment (C1AC1)
    DESCRIPTION This DTC is stored when the angle of the blind spot monitor sensor LH (Master) deviates more than the allowable range from the horizontal axis. HINT: If a drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with t ...

    © 2017-2020 Copyright www.tochr.net
    0.0143