Toyota CH-R Service Manual: Diagnosis System

DIAGNOSIS SYSTEM

CHECK DLC3

(a) Check the DLC3.

Click here

INSPECT BATTERY VOLTAGE

(a) Measure the battery voltage.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, replace the battery.

    Data List / Active Test
    DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any part ...

    Operation History List
    OPERATION HISTORY LIST NOTICE: If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before operation his ...

    Other materials:

    Toyota CH-R Owners Manual > Operating the lights and wipers: Automatic High Beam
    The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of vehicles ahead etc., and automatically turns the high beam on or off as necessary. WARNINGâ– Limitations of the Automatic High Beam Do not rely on the Automatic High Beam. Alway ...

    Toyota CH-R Service Manual > Lighting System: Headlamp LH Circuit (B2439,B243A)
    DESCRIPTION A DTC is stored when the headlight ECU sub-assembly receives a light source malfunction signal from its respective headlight unit. The headlight ECU sub-assembly LH stores DTC B2439 or B243A. DTC No. Detection Item DTC Detection Condition ...

    Toyota C-HR (AX20) 2023-2025 Owner's Manual

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2025 Copyright www.tochr.net
    0.0085