Toyota CH-R Service Manual: Data List / Active Test

Toyota CH-R Service Manual / Theft Deterrent / Keyless Entry / Theft Deterrent System / Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Body Electrical / Main Body / Data List.

(e) Read the Data List according to the display on the Techstream.

Body Electrical > Main Body > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Key Unlock Warning SW	Unlock warning switch*1	ON or OFF	ON: Key is inserted into ignition key cylinder OFF: Key is removed from ignition key cylinder	-
ACC SW	Ignition switch ACC signal	ON or OFF	ON: Ignition switch ACC OFF: Ignition switch off	-
IG SW	Ignition switch ON signal	ON or OFF	ON: Ignition switch ON OFF: Ignition switch off or ACC	-
RR Door Courtesy SW	Rear door courtesy light switch assembly RH	ON or OFF	ON: Rear door RH open OFF: Rear door RH closed	-
RL Door Courtesy SW	Rear door courtesy light switch assembly LH	ON or OFF	ON: Rear door LH open OFF: Rear door LH closed	-
Back Door Courtesy SW	Back door courtesy light switch	ON or OFF	ON: Back door open OFF: Back door closed	-
FR Door Lock Pos	Front door RH unlock detection switch	LOCK or UNLOCK	LOCK: Front door RH locked UNLOCK: Front door RH unlocked	-
FR Door Courtesy SW	Front door courtesy light switch assembly RH	ON or OFF	ON: Front door RH open OFF: Front door RH closed	-
FL Door Lock Pos	Front door LH unlock detection switch	LOCK or UNLOCK	LOCK: Front door LH locked UNLOCK: Front door LH unlocked	-
FL Door Courtesy SW	Front door courtesy light switch assembly LH	ON or OFF	ON: Front door LH open OFF: Front door LH closed	-
Hood Courtesy SW	Hood courtesy switch	ON or OFF	ON: Hood open OFF: Hood closed	-
RR-Door Lock Pos SW	Rear door RH and LH unlock detection switch	ON or OFF	ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked	-
RL-Door Lock Pos SW	Rear door RH and LH unlock detection switch	ON or OFF	ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked	-
Security control with mechanism key	Setting of customize setting "Security control with mechanism key"	ON or OFF	Customize setting displayed	-
Communication Theft Deterrent	Connection status between theft deterrent ECU and main body ECU (multiplex network body ECU)*2	STOP or OK	STOP: Communication stopped OK: Normal communication	Not applicable
The Number of DTC	Number of DTCs	0 to 255	Number of DTCs will be displayed	-

*1: w/o Smart Key System
*2: Although the item is displayed on the Techstream, it is not applicable to this vehicle.

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Body Electrical / Main Body, Immobiliser or Smart Key / Active Test.

(e) Perform the Active Test according to the display on the Techstream.

Body Electrical > Main Body > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Security Indicator	Security Indicator	OFF/ON	-
Vehicle Horn	Vehicle horns	OFF/ON	-
Security Horn	Security horn assembly	OFF/ON	-

Body Electrical > Smart Key > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Immobiliser Indicator	Security indicator*1	OFF/ON	-

*1: w/ Smart Key System

Body Electrical > Immobiliser > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Security Indicator	Security indicator light*1	ON/OFF	-

*1: w/o Smart Key System

Terminals Of Ecu

TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) *A Main Body ECU (Multiplex Network Body ECU) with 2 Connecto ...

Diagnosis System

DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here INSPECT BATTERY VOLTAGE (a) Measure the battery voltage. Standard Voltage: 11 to 14 V If the voltage is below 11 V, replace the ba ...

Other materials:

Toyota CH-R Service Manual > Lighting System: Hazard Warning Switch Circuit
DESCRIPTION The combination meter assembly receives the hazard warning signal switch assembly on signal and controls the operation of the hazard warning lights. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: When replacing the combination meter assembly, always replace it with a new one. ...

Toyota CH-R Service Manual > Vehicle Stability Control System: Open in Front Speed Sensor RH (C1330-C1467)
DESCRIPTION Each speed sensor detects wheel speed and sends signals to the skid control ECU (brake actuator assembly). These signals are used by the ABS. HINT: The output voltage values shown below are for when the vehicle wire harnesses are connected to the skid control ECU (brake actuator a ...

Toyota CH-R Service Manual: Data List / Active Test

Terminals Of Ecu

Diagnosis System

Other materials:

Toyota CH-R Owners Manual

Toyota CH-R Service Manual