Toyota CH-R Service Manual: Problem Symptoms Table

HINT:

• Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
• Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Initialization

INITIALIZATION DESCRIPTION (a) Zero point of the occupant classification sensors may deviate in the following situations. To ensure sensor accuracy, be sure to perform Zero Point Calibration. ...

Terminals Of Ecu

TERMINALS OF ECU OCCUPANT DETECTION ECU Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition ...

Other materials:

Toyota CH-R Service Manual > Continuously Variable Transaxle Assembly(when Using The Engine Support Bridge): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the continuously variable transaxle assembly removal/installation are shown below. Necessary Proced ...

Toyota CH-R Service Manual > Occupant Classification System: Occupant Classification ECU Malfunction (B1795)
DESCRIPTION DTC B1795 is stored when a malfunction is detected in the occupant detection ECU. DTC No. Detection Item DTC Detection Condition Trouble Area B1795 Occupant Classification ECU Malfunction Occupant dete ...