PRECAUTION
CAUTION:
Replace any faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting a vehicle that has been involved in a collision, be sure to check all of the seat belt systems regardless of whether or not the system was activated in the collision. Replace any damaged or malfunctioning systems.
ROAD TEST (IN SAFE AREA)
CAUTION:
Conduct this test in a safe area.
(a) Fasten the front seat belts.
(b) Drive the vehicle at 16 km/h (10 mph) and firmly depress the brake pedal. Check that the front seat outer belt assemblies lock and cannot be extended.
If a front seat outer belt assembly does not lock, replace it.
Click here
HINT:
Inspect the seat belt assembly before installing it.
Click here
Toyota CH-R Service Manual > Vehicle Stability Control System: ABS Warning Light Remains ON
DESCRIPTION
The skid control ECU (brake actuator assembly) is connected to the combination
meter assembly via CAN communication. If any of the following is detected, the ABS
warning light remains on:
The skid control ECU (brake actuator assembly) connector is disconnected
from the s ...
Toyota CH-R Service Manual > Rear Seat Inner Belt Assembly(for Lh Side): Removal
REMOVAL
PROCEDURE
1. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
Click here
2. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
Click here
3. REMOVE REAR SEAT CUSHION LOCK HOOK
Click here
4. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
(a) w/o Seat Belt Warning System:
...