Toyota CH-R Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

  • Be sure to read Precaution thoroughly before servicing.

    Click here

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

  • Use the same procedure for RHD and LHD vehicles.
  • The procedure listed below is for LHD vehicles.
  • Use the same procedure for the driver side and front passenger side.
  • The procedure listed below is for the driver side.

PROCEDURE

1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY

(a) Install the front seat cushion heater assembly to the separate type front seat cushion cover with 14 new tag pins.

2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

Click here

3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

Click here

4. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

Click here

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during th ...

    Front Seatback Heater
    ...

    Other materials:

    Toyota CH-R Service Manual > Pre-collision System: Skid Control Buzzer Circuit (C1A4A)
    DESCRIPTION The millimeter wave radar sensor assembly is connected to the forward recognition camera via CAN communication. The millimeter wave radar sensor assembly operates the pre-collision alarm by sending a buzzer request signal to the pre-collision city buzzer. If the millimeter wave ra ...

    Toyota CH-R Service Manual > Pre-collision System: Other System Malfunction (C1A63)
    DESCRIPTION The millimeter wave radar sensor receives the throttle signal from the ECM and judges whether the driver is making an acceleration request. When the ECM detects an electronic throttle malfunction, it informs the millimeter wave radar sensor via CAN communication and sets DTC C1A63. ...

    © 2017-2021 Copyright www.tochr.net
    0.0182