Replacement
REPLACEMENT
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE VANITY LIGHT ASSEMBLY
Click here
2. REMOVE VANITY LIGHT BULB
(a) Remove the vanity light bulb as shown in the illustration.
|
Remove in this Direction |
3. INSTALL VANITY LIGHT BULB
(a) Install the vanity light bulb as shown in the illustration.
|
Install in this Direction |
4. INSTALL VANITY LIGHT ASSEMBLY
Click here
Vanity Light
Vanity Light SwitchToyota CH-R Service Manual > Front Door Outside Moulding: Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedures listed below are for the LH side.
PROCEDURE
1. INSTALL FRONT DOOR OUTSIDE MOULDING
(a) Remove the peeling paper from the face of the outside moulding retainer.
HINT:
Af ...
Toyota CH-R Service Manual > Pre-collision System: Stop Light Relay Circuit (C1A4B)
DESCRIPTION
The skid control ECU (brake actuator assembly) sends a stop light operation request
signal to the stop light switch assembly. If the skid control ECU (brake actuator
assembly) detects a malfunction in the stop light switch assembly circuit, the millimeter
wave radar sensor assembl ...