Replacement
REPLACEMENT
PROCEDURE
1. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Click here
2. REMOVE LUGGAGE COMPARTMENT LIGHT BULB
(a) Disengage the claws and guides to remove the luggage compartment light shade as shown in the illustration.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
(b) Remove the luggage compartment light bulb as shown in the illustration.
|
Remove in this Direction |
3. INSTALL LUGGAGE COMPARTMENT LIGHT BULB
(a) Install the luggage compartment light bulb as shown in the illustration.
|
Install in this Direction |
(b) Engage the guides and claws to install the luggage compartment light shade as shown in the illustration.
|
Install in this Direction (1) |
|
Install in this Direction (2) |
4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Click here
Luggage Compartment Room Light
Map Light BulbToyota CH-R Service Manual > Front Lower Ball Joint: On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY
(a) Check for looseness.
(1) Lift up the vehicle.
(2) Move the front lower No. 1 suspension arm sub-assembly up and down
by hand with a force of 294 N (30 kgf) or more to check that there is no
loo ...
Toyota CH-R Service Manual > Vehicle Stability Control System: Steering Angle Sensor Initialization Incomplete (C1439,C1445)
DESCRIPTION
The skid control ECU (brake actuator assembly) acquires the steering angle sensor
zero point every time the ignition switch is turned to ON and the vehicle is driven
at 50 km/h (31 mph) or more for approximately 30 seconds. The ECU also stores previous
zero points.
DTC ...