CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE LIGHTING SYSTEM (INT)
(a) Customizing using the Techstream
HINT:
The following items can be customized.
NOTICE:
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Main Body / Utility / Customize / Illuminated Entry.
(5) Select the setting by referring to the table below.
Illuminated Entry
Tester Display |
Description |
Default |
Setting |
ECU |
---|---|---|---|---|
Lighting Time |
Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly is on:
|
15 s |
10:30 s,00:15 s,01:7.5 s |
Main body ECU (Multiplex network body ECU) |
I/L when ACC OFF |
Turns off the following lights automatically when the door switch of the map light assembly is on and the ignition switch is turned from ACC or ON to off:
|
ON |
0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
I/L ON W/Door Key Unlock |
Turns on the following lights automatically when the door switch of the map light assembly is on and the doors are unlocked by an unlock operation (key-linked, wireless or entry unlock function):
|
ON |
0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
Room Light when Aprchd |
Turns on the following lights when the door switch of the map light assembly is on and the electrical key transmitter sub-assembly is brought near the vehicle (*2):
|
ON |
0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
Light Control |
Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P:
|
ON |
0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
Interior Light Control |
Turns on the following lights:
|
ON |
0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
Interior Illumination Light |
Turns on the following lights:
|
ON |
0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
(b) Customizing with the multi-display (for Radio and Display Type)
(1) Turn the ignition switch to ON.
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.
(3) Select the setting by referring to the table below.
Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
Interior Lights Auto-off Timer |
15 sec. |
Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light assmbly is on:
|
Off, 7.5 sec., 15 sec., 30 sec. |
Main body ECU (Multiplex network body ECU) |
Toyota CH-R Service Manual > Pre-collision System: Lost Communication with Cruise Control Front Distance Range Sensor (U0235)
DESCRIPTION
The millimeter wave radar sensor assembly is connected to the skid control ECU
(brake actuator assembly) by a CAN communication line.
When entering test mode, the skid control ECU (brake actuator assembly) communicates
with the millimeter wave radar sensor assembly and determines w ...
Toyota CH-R Service Manual > Rear Suspension Member: Installation
INSTALLATION
PROCEDURE
1. INSTALL HOLE PLUG
(a) Install the 7 hole plugs to the rear suspension member sub-assembly as shown
in the illustration.
2. INSTALL REAR SUSPENSION MEMBER HOLE COVER
(a) Install the 4 rear suspension member hole covers to the rear suspension member
sub-assembly.
3. ...