Toyota CH-R Service Manual: Diagnosis System

DIAGNOSIS SYSTEM

DESCRIPTION

Air conditioning system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform troubleshooting.

CHECK DLC3

Check the DLC3.

Click here

    Terminals Of Ecu
    TERMINALS OF ECU AIR CONDITIONING AMPLIFIER ASSEMBLY HINT: Check from the rear of the connector while it is connected to the air conditioning amplifier assembly. Terminal No. (Sy ...

    Dtc Check / Clear
    DTC CHECK / CLEAR DTC CHECK USING TECHSTREAM (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical ...

    Other materials:

    Toyota CH-R Service Manual > Can Communication System: Check Bus 5 Line for Short to GND
    DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 15 (CA5H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 16 (CA5L) of the central gateway ECU (network gateway ECU) and ...

    Toyota CH-R Service Manual > Tire Pressure Warning System: Tire Pressure Monitor Receiver Communication Stop (B1247)
    DESCRIPTION The main body ECU (multiplex network body ECU) and tire pressure warning ECU and receiver are connected using 2 direct lines that they use to communicate with each other. DTC No. Detection Item DTC Detection Condition Trouble Area ...

    © 2017-2020 Copyright www.tochr.net
    0.0168