Using an anchor bracket (for top tether strap)
Engine immobilizer systemToyota CH-R Service Manual > Rear Door Outside Moulding: Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedures listed below are for the LH side.
PROCEDURE
1. REMOVE REAR DOOR OUTSIDE MOULDING
(a) Apply protective tape around the rear door outside moulding.
Protec ...
Toyota CH-R Service Manual > Vacuum Pump: Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE END COVER
(a) Using a T25 "TORX" socket wrench, remove the 5 screws and end cover.
NOTICE:
Hold the vacuum pump assembly so that its installation surface,
fitting parts and oil pipe will not be damaged.
As the vac ...