Toyota CH-R Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.

PROCEDURE

1. INSTALL TRANSMITTER BATTERY

(a) Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

Install in this Direction

NOTICE:

  • Do not bend the transmitter battery electrode during installation.
  • Keep the inside of the transmitter housing cover free of dust and oil.
  • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

2. INSTALL DOOR CONTROL TRANSMITTER PACKING

(a) Install the door control transmitter packing as shown in the illustration.

Install in this Direction

3. INSTALL TRANSMITTER HOUSING COVER

(a) Install the transmitter housing cover as shown in the illustration.

Install in this Direction

    Inspection
    INSPECTION PROCEDURE 1. INSPECT DOOR CONTROL TRANSMITTER (a) Inspect operation of the door control transmitter assembly. (1) Remove the transmitter battery from the door control transmitter assemb ...

    Front Door Lock
    ...

    Other materials:

    Toyota CH-R Service Manual > Heating / Air Conditioning: Ambient Temperature Sensor
    Components COMPONENTS ILLUSTRATION *1 THERMISTOR ASSEMBLY - - Removal REMOVAL PROCEDURE 1. REMOVE FRONT BUMPER ASSEMBLY Click here 2. REMOVE THERMISTOR ASSEMBLY (a) Disconnect the connector. ...

    Toyota CH-R Service Manual > Front Seat Cushion Heater: Inspection
    INSPECTION PROCEDURE 1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (a) for TMC Made: (1) Check the resistance. Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection ...

    © 2017-2022 Copyright www.tochr.net
    0.0115