DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE OUTER MIRROR
Click here
2. REMOVE OUTER MIRROR COVER
Click here
3. REMOVE SIDE TURN SIGNAL LIGHT BULB
Click here
4. REMOVE OUTER MIRROR LIGHT ASSEMBLY (w/ Illumination)
Click here
5. REMOVE NO. 2 OUTER MIRROR COVER (w/ Illumination)
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the No. 2 outer mirror cover as shown in the illustration.
*a |
Protective Tape |
Remove in this Direction |
Toyota CH-R Service Manual > Can Communication System: Check Bus 5 Line for Short to GND
DESCRIPTION
There may be a short circuit between one of the CAN bus lines and GND when there
is no resistance between terminal 15 (CA5H) of the central gateway ECU (network
gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 16 (CA5L) of the central
gateway ECU (network gateway ECU) and ...
Toyota CH-R Service Manual > Front Wiper Motor: On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY
(a) for LH Side:
(1) Operate the windshield wiper motor assembly.
*a
Alignment Mark
...