Toyota CH-R Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.

Body Electrical > Air Conditioner > Trouble Codes

(e) Check for DTCs.

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.

Body Electrical > Air Conditioner > Clear DTCs

(e) Clear the DTCs.

    Diagnostic Trouble Code Chart
    DIAGNOSTIC TROUBLE CODE CHART Seat Heater System DTC No. Detection Item Link B14B5 Lost Communication with Front Seat Temperature Adjustm ...

    Lost Communication with Front Seat Temperature Adjustment Switch LIN (B14B5)
    DESCRIPTION The seat heater switch (air conditioning control assembly) communicates with the air conditioning amplifier assembly via LIN communication. If the LIN communication system is malfuncti ...

    Other materials:

    Toyota CH-R Service Manual > Meter / Gauge System: Data List / Active Test
    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the ...

    Toyota CH-R Service Manual > Rear Crossing Traffic Alert Buzzer: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the blind spot monitor buzzer removal/installation are shown below. Necessary Procedures After P ...

    © 2017-2019 Copyright www.tochr.net
    0.0156