Toyota CH-R Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main body / Trouble Codes.

Body Electrical > Main Body > Trouble Codes

(e) Check for DTCs.

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main body / Clear DTCs.

Body Electrical > Main Body > Clear DTCs

(e) Clear the DTCs.

    Diagnosis System
    DIAGNOSIS SYSTEM DESCRIPTION (a) Lighting system data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioni ...

    Fail-safe Chart
    FAIL-SAFE CHART FAIL-SAFE FUNCTION (for LED Headlight) (a) Headlight ECU sub-assembly (1) The headlight ECU sub-assemblies stop light operation if any of the following malfunctions are detected. ...

    Other materials:

    Toyota CH-R Service Manual > Rear Door: Disassembly
    DISASSEMBLY CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during the rear door removal/installation are shown below. Necessary Procedures After Parts Removed/ ...

    Toyota CH-R Service Manual > Navigation System: Noise Occurs
    PROCEDURE 1. CHECK NOISE CONDITION (a) Check from which direction the noise comes (front left or right, or rear left or right). OK: The location of the noise source can be determined. NG GO TO STEP 3 OK ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.0091