INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL HEADLIGHT ASSEMBLY
(a) Temporarily install the headlight assembly as shown in the illustration.
|
Install in this Direction |
(b) Install the headlight assembly with the bolt and 3 screws.
Torque:
Bolt :
5.4 N·m {55 kgf·cm, 48 in·lbf}
(c) Connect the 3 connectors.
(d) Remove the protective tape.
2. INSTALL FRONT BUMPER ASSEMBLY
Click here
3. PERFORM INITIALIZATION
Click here
4. ADJUST HEADLIGHT AIMING
Click here
Reassembly
RepairToyota CH-R Service Manual > Vehicle Stability Control System: High Power Supply Voltage Malfunction (C1417)
DESCRIPTION
If a malfunction is detected in the power supply circuit, the skid control ECU
(brake actuator assembly) stores this DTC and the fail-safe function prohibits ABS
operation.
This DTC is stored when the +BS terminal voltage deviates due to a malfunction
in a power supply or chargin ...
Toyota CH-R Service Manual > Wiper And Washer System: Fail-safe Chart
FAIL-SAFE CHART
RAIN SENSOR FAIL-SAFE FUNCTION
(a) The windshield wiper switch assembly performs the fail-safe function when
the wiper system cannot properly receive the necessary signals for wiper system
control or a wiper system component is malfunctioning.
Item
Fail-s ...