To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine.
Follow the procedure below to restart the engine after the system is activated.
Vehicles without a smart key system
1. Turn the engine switch to the "ACC" or "LOCK" position.
2. Restart the engine.
Vehicles with a smart key system
1. Turn the engine switch to ACCESSORY mode or turn it off.
2. Restart the engine.
■Before starting the engine Inspect the ground under the vehicle.
If you find that fuel has leaked onto the ground, the fuel system has been damaged and is in need of repair. Do not restart the engine.
If you think something is wrong
If a warning light turns on or a warning buzzer soundsToyota CH-R Service Manual > Power Door Lock Control System: System Diagram
SYSTEM DIAGRAM
Power Door Lock Control System
Communication Table
Sender
Receiver
Signal
Line
Multiplex Network Master Switch Assembly
Main Body ECU (Multiplex Network Body ECU)
Door control switch signal
...
Toyota CH-R Service Manual > Front Shock Absorber: Removal
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration)
that must be performed after parts are removed and installed, or replaced during
front shock absorber assembly removal/installation are shown below.
Necessary Procedures After P ...