Toyota CH-R Service Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL RADIATOR GRILLE

(a) Engage the claws to install the radiator grille.

(b) Install the 2 bolts.

2. INSTALL FRONT BUMPER ASSEMBLY (w/o Toyota Safety Sense)

Click here

3. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Toyota Safety Sense)

Click here

    Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (a) Engage the guides and claws to install the radiator grille (or front panel) emblem. ...

    Rear Bumper
    ...

    Other materials:

    Toyota CH-R Service Manual > Can Communication System: Open in Bus 1 Main Bus Line
    DESCRIPTION There may be an open circuit in one of the CAN main bus lines when the resistance between terminals 23 (CA1H) and 8 (CA1L) of the central gateway ECU (network gateway ECU) is 70 Ω or higher. Symptom Trouble Area Resistance between terminals 2 ...

    Toyota CH-R Service Manual > Automatic Headlight Beam Level Control System: Initialization has not been Performed (B2450)
    DESCRIPTION The headlight ECU sub-assembly LH stores this DTC if initialization has not been performed after the ECU was replaced. DTC No. Detection Item DTC Detection Condition Trouble Area Note B2450 Initializat ...

    © 2017-2020 Copyright www.tochr.net
    0.0276