REASSEMBLY
PROCEDURE
1. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
(a) Engage the guides and claws to install the radiator grille (or front panel) emblem. |
|
(b) Install 2 new spring nuts. |
|
2. INSTALL RADIATOR INSIDE GRILLE
(a) Install the 6 nuts. |
|
(b) Engage the claws to install the radiator inside grille. |
|
(c) Install the 2 screws.
3. INSTALL HOOD TO RADIATOR GRILLE SEAL
(a) Engage the clips to install hood to radiator grille seal. |
|
Toyota CH-R Service Manual > Rear Shock Absorber: Removal
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration)
that must be performed after parts are removed and installed, or replaced during
rear shock absorber assembly removal/installation are shown below.
Necessary Procedures After Pa ...
Toyota CH-R Service Manual > Vehicle Stability Control System: Fail-safe Chart
FAIL-SAFE CHART
FAIL-SAFE OPERATION
If there is a problem with sensor signals or actuator systems, the skid
control ECU prohibits power supply to the brake actuator assembly and informs
the ECM of a VSC system malfunction.
The brake actuator assembly turns off the solenoids and t ...