Toyota CH-R Service Manual: Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY (w/o Toyota Safety Sense)

Click here

2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Toyota Safety Sense)

Click here

3. REMOVE RADIATOR GRILLE

(a) Remove the 2 bolts.

(b) Disengage the claws to remove the radiator grille.

    Components
    COMPONENTS ILLUSTRATION *1 RADIATOR GRILLE - - ILLUSTRATION *1 HOOD TO RADIATOR GRILLE SEAL *2 ...

    Disassembly
    DISASSEMBLY PROCEDURE 1. REMOVE HOOD TO RADIATOR GRILLE SEAL (a) Disengage the clips to remove hood to radiator grille seal. 2. REMOVE RA ...

    Other materials:

    Toyota CH-R Service Manual > Vehicle Stability Control System: Brake Pedal Load Sensing Switch OFF Stuck Malfunction (C1430,C1431)
    DESCRIPTION The brake pedal load sensing switch turns on when the brake pedal is depressed with a force exceeding a predetermined level. The skid control ECU uses this circuit to detect if the brake pedal is depressed or not. DTC No. Detection Item DTC Detecti ...

    Toyota CH-R Service Manual > Rear Airbag Sensor: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL NO. 2 SIDE AIRBAG SENSOR (a) Check that the ignition switch off. (b) Check that the cable is disconnected from the ...

    © 2017-2021 Copyright www.tochr.net
    0.023