Toyota CH-R Service Manual: Fuel Lid Opener System

Toyota CH-R Service Manual / Door / Hatch / Fuel Lid Opener System

Parts Location

PARTS LOCATION

ILLUSTRATION

*1

FUEL LID WITH MOTOR LOCK ASSEMBLY

*2

NO. 1 ENGINE ROOM RELAY BLOCK

- FUEL OPN FUSE

ILLUSTRATION

*1

FUEL LID OPENER SWITCH

*2

FUEL OPN RELAY

*3

INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

-

-

System Diagram

SYSTEM DIAGRAM

Operation Check

OPERATION CHECK

CHECK FUEL LID OPENER SYSTEM

(a) Push the fuel lid opener switch and check that the fuel lid opens.

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Fuel Lid Opener System

Symptom

Suspected Area

Link

Fuel lid opener does not operate

Fuel lid opener switch

Fuel lid lock with motor assembly

Harness or connector

-

    Installation
    INSTALLATION PROCEDURE 1. INSTALL FUEL LID OPENER SWITCH (a) Engage the claws to install the fuel lid opener switch as shown in the illustration. Install in this Direction ...

    Hood
    ...

    Other materials:

    Toyota CH-R Service Manual > Wireless Door Lock Control System(w/o Smart Key System): Registration
    REGISTRATION CAUTION / NOTICE / HINT HINT: Register a new recognition code when replacing the door control transmitter assembly or the door control and tire pressure monitoring system receiver assembly. Add mode is used to retain the codes that have already been registered ...

    Toyota CH-R Service Manual > Front Door Window Frame Moulding: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL FRONT DOOR FRONT WINDOW FRAME MOULDING (a) Using an air riveter or hand riveter with a nose piece, install the front ...

    © 2017-2019 Copyright www.tochr.net
    0.0179